CSIRO partnership is delivering research and development to support next generation low emission energy technologies.
Beryllium in Australian export thermal coals
An examination of beryllium in Australian export thermal coals intended for industrial, scientific and research audiences.
- 21 July 2010 | Updated 14 October 2011
Trace elements in coals may be associated with specific minerals or with organic 'coaly' matter.
The sources of trace elements include biological material (plants, algae and bacteria) that is the precursor of the coaly material, water in the peat swamp and mineralogical material washed or blown into the swamp.
| Concentration of beryllium in: | mg/kg |
|---|---|
| Australian export coals | 0.2 - 2.1 (0.8) # |
| Other internationally traded coals | 0.06 - 4.9 (1.1) # |
| Earth's crust | 1.8 |
| Earth's shales | 15 |
| # values in parentheses are averages | |
Beryllium has been identified as a Hazardous Air Pollutant (HAP) by environmental authorities.
Modes of occurrence
There is a very high level of uncertainty about the occurrence of beryllium in bituminous coals. It is likely present in the organic matter and in clays. In some coals, it appears to be associated with finely divided silicate phases dispersed in the organic matter.
Behaviour during combustion
Beryllium is volatile and condenses on the ash particles. It is enriched in the finer particles; a small percentage of these fine particles are emitted to the atmosphere from modern power stations.
Health and environmental effects
On the spectrums:
- for the NPI health hazard of 0–3, beryllium and compounds registers 2.3
- for the NPI environmental of 0-3, beryllium and compounds registers 1.7.
Beryllium emissions from coal fired power stations are not regarded as likely to have adverse environmental or health impacts.
Analytical methods
There are a number of Standard Methods for determining beryllium in coal.
AS 1038.10.0, Australian Standard, Coal and coke - Analysis and testing - Part 10.0: Determination of trace elements – Guide to the determination of trace elements. Australian Standards.
ASTM D6357-00a Test Methods for Determination of Trace Elements in Coal, Coke and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass and Graphite Furnace Atomic Absorption Spectrometries.
Find out more about our work with Energy from Coal.
This work supported by:
Share this CSIRO content using:
Fast facts
- Trace elements in coals may be associated with specific minerals or with organic 'coaly' matter
- There is a very high level of uncertainty about the occurrence of beryllium in bituminous coals
- It is likely present in the organic matter and in clays
