Volcanoes of Eastern Australia Author: Chris Meagher This resource was developed as a result of participation in CSIRO’s teacher professional learning program, Educator on Board. © Volcanoes of Eastern Australia (created by Chris Meagher) (2020). Copyright owned by the Department of Education, Queensland. Except as otherwise noted, this work is licenced under the Creative Commons Attribution 4.0 International Licence. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/ cid:image005.png@01D4620F.F55F9320 cid:image005.png@01D4620F.F55F9320 Continental Hot Spot Volcanoes of Eastern Australia 34-6 million years ago About 34 million years ago basalt magmas broke through a weaker part of the continental crust and erupted in a hot spot volcano near Mackay in North Queensland. As the Australian tectonic plate slowly moved northward over the hot spot a line of volcanoes was produced from North Queensland to Mt Macedon just North of Melbourne (6 MYA). As the hot spot passed below the Brisbane Region other volcanoes formed including the Glasshouse Mountains north of Brisbane (26 MYA) and Mt Warning just south of the Gold Coast (23 MYA). The mountains which we see today are remnants of the central volcanic plugs which are much harder than the surrounding rock. The tallest peak in the Glasshouse Mountains is Mt Tibrogargan 364m while Mt Warning’s peak is 1156m. Mt Warning Mt Tibrogargan The Tweed Volcano 23 million years ago By 23 million years ago the hot spot had moved south and was located below present day Mt Warning in northern NSW. At this time the Tweed Volcano erupted lavas to form a very large shield shaped mountain which was 2km high and over 100 km wide at the base. This shield shaped mountain is formed mainly from the extrusive igneous rock basalt. Over time heavy rain gradually eroded the basalt sides of the volcano. The central intrusive plug of the volcano is mainly rhyolite which has is much harder than basalt. This central plug was not eroded and today forms Mt Warning. Many of the mountain ranges south of the Gold Coast are formed from the remnants of this massive volcano. (Images Willmott, 2010) Continental Hot Spot Volcanoes of Eastern Australia - Questions Use the text and diagrams above to answer the following questions: 1. Explain how the volcanic hotspot led to the creation of mountains down the East coast of Australia. ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ 2. Compare the properties of Basalt and Ryolite and explain how this has led to the formation of the central plug of Mt Warning ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ 3. Explain how weathering of the Tweed Volcano led to the formation of Mount Warning and surrounding mountains. Outline why there has been more erosion on the Eastern slopes over time. ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ 4. Outline where the material which formed the original shield has been transported to. ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ 5. Use your knowledge of hotspot volcano formation to infer why the present day height of Mt Tibrogargan is much less than the height of Mt Warning. ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ 6. Describe the changes in vegetation from when the original volcano was formed until today. _______________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ Images sourced from: Willmott, Warwick (2010) “Rocks and Landscapes of the Gold Coast Hinterland (Expanded Third Edition)” Geological Society of Australia, Queensland Division Tectonics and Volcanics of the Brisbane Region Brisbane Tectonics Brisbane Region: 370-315 million years ago At this time the coast was much further west than its current position. Large volumes of sediment were washed down onto the continental shelf and the deep ocean floor. Over time sedimentary rocks were formed including Mudstone and Shale. Magma below the crust broke through in some places to form underwater volcanoes and the resulting lava cooled quickly in the underwater environment and produced deposits of the igneous rock Basalt. Microscopic animals called radiolarian also congregated around volcanic vents. Over time the mineral skeletons of radiolarian (made mainly of silica) formed into a sedimentary rock called Chert which is rich in silica. (Images Willmott, 2012) Brisbane Region: 315-250 million years ago Compression at the plate boundary 315 MYA crumpled and folded these sediments to form metamorphic rocks. The heat and pressure caused the Mudstone and Shale to change into Argillite (metamorphic) and these folded and crumpled metasediments can be seen in many road cuttings around Brisbane today. The heat and pressure also caused Basalt to change into Greenstone (metamorphic). Further compression and uplifting occurred around 250 MYA when large areas of these metamorphic rocks were pushed up to form a mountain range attached to the continent. These have eventually worn down to form the hills around Brisbane. The sedimentary Chert deposits from the radiolarian were subject to heat and pressure to form the metamorphic rock Quartzite which was later pushed up to form the some hills in Brisbane, including Mt Gravatt which is composed almost entirely of a thick band of Quartzite. Brisbane Volcanoes Brisbane Region: 235 –210 million years ago Around 235 MYA there were several highly explosive volcanoes in the Brisbane area which produced huge clouds of gas and fragments of sticky lava. These volcanos were probably located North of Chermside or around Woodford. These ash cloud were heavier than air and “flowed” down the valleys which existed at the time. The ash flows were extremely hot (1000° C), very thick (up to 80m deep), and traveling very fast (over 200 km/hr). Ash flows travelled up to 100km and when it stopped flowing it compacted into a very hard rock called Tuff (or ignimbrite – Latin for fiery shower). Large volumes of Brisbane Tuff would have formed over a few days. Dinosaurs lived around Brisbane at this time and it can be assumed that some of them would have been killed in this awesome event. The pattern of these valleys can be seen from the current distribution of the Brisbane Tuff (shown in blue). Around Enoggera the underground magma chamber did not break through to the surface and cooled slowly to form the igneous rock Granite. Around the edge of the granite area of Argillite (crumpled meta-sediments of mudstone and shale) were heated to form the metamorphic rock Hornfels which is quarried at Mt Cootha for use as road base. (Images Willmott, 2012) Tectonics and Volcanics of the Brisbane Region- Questions 1. In the formation of metamorphic rocks we call the original rock the parent rock and the resulting rock the daughter rock. a) Using the information in the article above, state the names of the daughter rocks and infer if they are examples of regional or contact metamorphism. Parent Rock Daughter Rock Regional or Contact Metamorphism Mudstone / shale Basalt Chert Granite b) Discuss the processes which led to the formation of these metamorphic rocks and justify your answers regarding type of metamorphism ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ 2. Use your knowledge of the geological history of Brisbane to explain why it is so hilly. ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ 3. Using your knowledge of the rock cycle explain how the silicon based skeletons of radiolarian around ocean vents came to form the Quartzite which can be found in Brisbane today. ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ 4. Compare the processes which led to the formation of Basalt and Granite described above (ensure you discuss crystal size) ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ 5. Explain how the igneous rock Tuff was formed and what the existing pattern of Tuff can tell us about the ancient topography of Brisbane. ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ Images sourced from: Willmott, Warwick (2012) “Rocks and Landscapes of Brisbane and Ipswich (Second Edition)” Geological Society of Australia, Queensland Division (Blakey, n.d.) AUSTRALIA IN THE PALEOGENE PERIOD (65 MYA) (Johnson, n.d.) GEOLOGIC TIMESCALE: PALEOGENE PERIOD (66 – 23 MYA) NEOGENE PERIOD (23 - 2.6 MYA) (FORMERLY TERTIARY) (Geosciences Australia, 2015) • Some volcanoes form over ‘hotspots’ in the Earth’s crust which are not located at tectonic plate boundaries. • These volcanoes are thought to have formed from mantle hot-spots from deep in the Earth, producing mantle plumes that send magma towards the Earth’s surface. • There is not scientific consensus on why these hotspots exist and research is continuing. • A chain of volcanoes form as the tectonic plate moves over the hot-spot, which increase in age away from current volcanic activity. Sometimes called age-progressive volcano chains. HOTSPOT VOLCANO CHAINS (Roach and Bear-Crozier, 2017, p. 23) • Volcanoes erupted along eastern Australia and Tasmania. • Australia’s climate was warm and humid. • Temperate rainforest was widespread. • The Australia plate has moved north and collided with Indonesia and New Guinea. • Most of giant Australian megafauna became extinct during this time • Continental Hotspot Volcano Chains - occur below continental crust and form a volcano. Do not occur in a straight line but follow a much more twisted path. CONTINENTAL HOTSPOT VOLCANO CHAINS (Roach and Bear-Crozier, 2017, p. 24) The Australian Plate is moving over a hot-spot with broken chains of ancient volcanoes found down the east coast from the oldest in north Queensland to the youngest in New South Wales. As the Australian tectonic plate slowly moved northward over the hot spot a line of volcanoes was produced from North Queensland (34 MYA) to Mt Macedon just North of Melbourne (6 MYA). CONTINENTAL HOTSPOT VOLCANO CHAINS (Willmott, 2010, p. 9) •The hot-spot is now thought to be between Victoria and the west coast of Tasmania but it is not currently causing volcanic activity. • It is thought that hotspot chains on land are not as straight as seamount chains as continental crust is much thicker and the magma does not always break straight through the crust but follows a more tortuous path. CONTINENTAL HOTSPOT VOLCANO CHAINS (Roach and Bear-Crozier, 2017, p. 36) As the hot spot passed below the Brisbane Region other volcanoes formed including: The Glasshouse Mountains (364m) north of Brisbane (26 MYA) Mt Warning (1156m) just south of the Gold Coast (23 MYA) The mountains which we see today are remnants of the central volcanic plug which is much harder then the surrounding rock. MORE RECENT VOLCANOES 26 - 23 MYA Mt Warning (Byron Bay Beaches) The Glasshouse Mountains (Queensland Government, 2019)  One of these was the massive Tweed Volcano centred on Mt Warning in northern NSW which erupted around 23 MYA TWEED VOLCANO 23 MYA Gold Coast Byron Bay Mt Warning (Willmott, 2010, p. 40) (Willmott, 2010, p. 16) (Willmott, 2010, p. 15) TWEED VOLCANO 23 MYA The Tweed Volcano erupted basalt lavas to form a very large shield shaped mountain which was 2km high and over 100 km wide at the base. (Willmott, 2010, p. 8) TWEED VOLCANO 23 MYA Shield shaped mountain of the Tweed volcano formed mainly from Basalt. (Willmott, 2010, p. 14) TWEED VOLCANO 23 MYA Over time heavy rain gradually eroded the basalt sides of the volcano. The central intrusive plug of the volcano is mainly rhyolite which is much harder than basalt. (Willmott, 2010, p. 14) TWEED VOLCANO 23 MYA Many of the mountain ranges south of the Gold Coast are formed from the remnants of this massive volcano. TWEED VOLCANO TODAY (Willmott, 2010, p. 14) • Many volcanoes in western Victoria and Eastern South Australia formed during the most recent period of volcanic activity between about five million and a few thousand years ago. • Well-preserved volcanic features such as craters, crater lakes and lava flows can be seen in western Victoria today. • The youngest volcanic feature in Australia, Mount Gambier is known to have last erupted around 4500 years ago. Australia’s indigenous people were likely witnesses to this volcanism as Aboriginal stone tools have been found buried beneath volcanic tuff (rock type) deposits. (Roach and Bear-Crozier, 2017, p. 24) VICTORIAN VOLCANOS 6 MYA https://www.australiangeographic.com.au/wp-content/uploads/2018/06/volcanoes.VIC_.Mt_.-Elephant.jpg Mt Elephant in Derrinallum (Bourke, 2017) Mt Gambier (Webber, 2016) Mount Schanck (Anson, 2015) • Anson, Peter (2015) “Kyneton to Mount Gambier Dec. 2015” retrieved 8 October 2019 from http://www.ansoneng.com/samplepage/ sonex-trips/kyneton-to-mount-gambier-dec-2015/ • Blakey, R (n.d.) “Geological Time Periods”, image creator Ron Blakey, Colorado Plateau Geosystems, altered by Cally Bennet and Fons Vanden Berg Melbourne Museum (2019) retrieved 20 October 2019 from: https://museumsvictoria.com.au/website/melbournemuseum/discoverycentre/600-million-years/timeline/index.html • Bourke, Jeremy (2017) “Forged by fire: Volcanoes in Victoria” retrieved 8 October 2019 from https://www.australiangeographic.com.au/topics/science-environment/2017/05/volcanic-victoria/ • Byron Bay Beaches (2018) “Byron Bay” https://www.byron-bay-beaches.com/mt-warning.html • Geology In (2018) “New Clue for Fast Motion of the Hawaiian Hotspot” retrieved 8 October 2019 from http://www.geologyin.com/2018/02/new-clue-for-fast-motion-of-hawaiian.html • Geosciences Australia (2015) “Australia Through Time” retrieved 8 October 2019 from http://d28rz98at9flks.cloudfront.net/71079/Australia_Through_Time_A3.pdf • Johnson, B. ,(n.d.) “Explore The Geologic Time Scale” retrieved 17 September 2018 from: https://www.sutori.com/story/geologic-time-scale-- 6jLYc56D5FvqWCbq3FHNwowh • Queensland Government (2019) “About: Glass House Mountains” retrieved 8 October 2019 from https://parks.des.qld.gov.au/parks/glasshouse- mountains/about.html • Roach, I. and Bear-Crozier, A. (eds.) 2017. Volcanoes: Teacher notes and student activities. Record 2017/23. Geoscience Australia, Canberra. http://dx.doi.org/10.11636/Record.2017.023 • Webber, Kate and Green, Selina (2016) “Volcanic eruption still possible in south-east Australia ... in 5,000 years or so” retrieved 8 October 2019 from https://www.abc.net.au/news/2016-05-27/volcanic-eruption-still-possible-in-south-east-australia/7451878 • Willmott, Warwick (2010) “Rocks and Landscapes of the Gold Coast Hinterland (Expanded Third Edition)” Geological Society of Australia, Queensland Division REFERENCES (Blakey, n.d.) AUSTRALIA IN THE DEVONIAN PERIOD 400 MILLION YEARS AGO (MYA) GEOLOGIC PERIODS • Cretaceous Creak • Jurassic Joints • Triassic Their • Permian Perhaps • Carboniferous Carefully • Devonian Down • Silurian Sit • Ordovician Often • Cambrian Camels GEOLOGICAL TIMESCALE (Johnson, n.d.) Read this way (Battison, 2012) (Johnson, n.d.) GEOLOGICAL TIMESCALE: DEVONIAN PERIOD (400 MYA) The eastern edge of the Australian continent was to the west of its present location. The oceanic crustal plate is subducted (forced under) the continental plate Volcanic mountain chain parallel to the continental edge. Temperate climate with woody trees. Land animals - simple amphibians emerging from the oceans. Brisbane region was in deep ocean water (over 1000m) BRISBANE REGION IN THE DEVONIAN PERIOD (400 MYA): SUBDUCTION ZONE (Willmott, 2012, p. 1) Tectonic plate boundary (Willmott, 2012, p. 1) BRISBANE REGION IN THE DEVONIAN PERIOD (400 MYA) Map data ©2018 Google BRISBANE REGION TODAY Coastline Today Coastline 300- 400 million years ago Map data ©2018 Google (Willmott, 2012, p. 1) (Cartoscope, n.d.) SUBDUCTION (Applied Geography, 2009) Image result for tectonic plates 300 mya SUBDUCTION (Blakey, n.d.) AUSTRALIA IN THE CARBONIFEROUS PERIOD (340 MYA) (Johnson, n.d.) GEOLOGIC TIMESCALE: CARBONIFEROUS PERIOD (FROM 370 TO 315 MYA) (Johnson, n.d.) Large volumes of sediment were washed down onto the continental shelf and the deep ocean floor Over time sedimentary rocks were formed including Mudstone, Shale and Chert Some areas of Basalt lavas Brisbane region (Willmott, 2012, p. 2) BRISBANE REGION IN THE CARBONIFEROUS (340 MYA): SEDIMENTS DEPOSITED IN DEEP OCEAN (FROM 370 TO 315 MYA) Large volumes of microscopic animals called radiolarian congregated around volcanic vents  Over time the mineral skeletons of radiolarian (made mainly of silica) formed into a sedimentary rock called Chert which is rich in silica RADIOLARIAN  CHERT https://micro.magnet.fsu.edu/micro/gallery/radiolarians/radiohead.jpg (Davidson, 2004) (King, n.d.) (Blakey, n.d.) AUSTRALIA IN THE PERMIAN PERIOD (280 MYA) (Johnson, n.d.) GEOLOGIC TIMESCALE: PERMIAN PERIOD (315 – 250 MYA) (Johnson, n.d.) Compression at the plate boundary 315 MYA crumpled and folded these sediments to form metamorphic rocks Further compression and uplifting occurred around 250 MYA when large areas of the rocks were pushed up to form a mountain range attached to the continent. This is one of the reasons for Brisbane’s very hilly terrain A common rock type in Brisbane is Argillite which is comprised of crumpled layers of partially metamorphosed mudstone and shale CRUMPLING AND UPLIFT OF SEDIMENTS PERMIAN PERIOD (315 – 250 MYA) (Willmott, 2012, p. 3) Map data ©2018 Google BRISBANE TOPOGRAPHY – HILLY TERRAIN (Willmott, 2012 , p. 53) GEOLOGY OF MT GRAVATT (Willmott, 2012, p. 40) Mt Gravatt is composed almost entirely of a thick band of quartzite (previously chert) Hills in this area including Wellers Hill and Toohey Mountain are also composed of quartzite GEOLOGY OF MT GRAVATT (Willmott, 2012, p. 53) quartzite (King, n.d.) (King, n.d.) RADIOLARIAN  CHERT  QUARTZITE quartzite (King, n.d.) quartzite (Davidson, 2004) This formation on the road to Mt Gravatt Lookout shows layers of quartzite which have been crumpled and folded when they were formed by heat and pressure The tightness of the folds shows the intensity of the forces which raised the whole rock unit from the ocean depths to form Mt Gravatt GEOLOGY OF MT GRAVATT (Willmott, 2012 , p. 54) Quartzite outcrops on the Mt Gravatt State High School oval GEOLOGY OF MT GRAVATT (Photos by author, 2018) • Applied Geography (2009) “Explore Learn Convergent Boundaries” retrieved 17 September 2018 from https://khsappliedgeography.weebly.com/convergent-boundaries.html • Battison, Leila (2012) “Camels in the Cambrian? A Geology Mnemonic”, retrieved 10 October 2019 from: https://leilabattison.wordpress.com/2012/01/29/camels-in-the-cambrian-a-geology-mnemonic/ • Blakey, R (n.d.) “Geological Time Periods”, image creator Ron Blakey, Colorado Plateau Geosystems, altered by Cally Bennet and Fons Vanden Berg Melbourne Museum (2019) retrieved 20 October 2019 from: https://museumsvictoria.com.au/website/melbournemuseum/discoverycentre/600-million-years/timeline/index.html • Cartoscope (n.d.) “Subduction Zones: Geological Sites of NSW”, retrieved17 September 2018 from: http://www.geomaps.com.au/scripts/subductzones.php • Davidson, Michael W. (2004) “Mixed Radiolarians in Darkfield Illumination”, retrieved 17 September 2018 from: https://micro.magnet.fsu.edu/micro/gallery/radiolarians/radiolarians.html • Google Maps (2018) “Map data ©2018 Google” retrieved 17 September 2018 from: https://www.google.com/maps/@- 27.1428484,151.6199159,8.48z • Johnson, B. ,(n.d.) “Explore The Geologic Time Scale” retrieved 17 September 2018 from: https://www.sutori.com/story/geologic-timescale-- 6jLYc56D5FvqWCbq3FHNwowh • King, Hobart M. (n.d.), “What Is Chert?” retrieved 17 September 2018 from: https://geology.com/rocks/chert.shtml • King, Hobart M. (n.d.), “What Is Quartzite?” retrieved 17 September 2018 from: https://geology.com/rocks/chert.shtml • Willmott, Warwick (2012) “Rocks and Landscapes of Brisbane and Ipswich (Second Edition)” Geological Society of Australia, Queensland Division • Willmott, Warwick (2010) “Rocks and Landscapes of the Gold Coast Hinterland (Expanded Third Edition)” Geological Society of Australia, Queensland Division REFERENCES (Blakey, n.d.) AUSTRALIA IN THE TRIASSIC PERIOD (240 MYA) (Johnson, n.d.) GEOLOGIC TIMESCALE: TRIASSIC PERIOD (235-215 MYA) (Johnson, n.d.)  At this time there were several highly explosive volcanoes around Brisbane which produced huge clouds of gas and fragments of sticky lava. These ash cloud were heavier than air and “flowed” down the valleys which existed at the time. The ash flows were extremely hot (1000° C), very thick (up to 80m deep), and traveling very fast (over 200 km/hr). The first mammals and dinosaurs lived around Brisbane during the Triassic, and it can be assumed that some of them would have been killed in this awesome event. BRISBANE VOLCANOES TRIASSIC PERIOD (235-215 MYA) (Willmott, 2012 , p. 2) Ash flows travelled up to 100km and when it stopped flowing it compacted into a very hard rock called Tuff (or ignimbrite – Latin for fiery shower). Large volumes of Brisbane Tuff would have formed over a few days. BRISBANE VOLCANOES 235 TO 215 MYA (Willmott, 2012 , p. 2) These volcanos were probably located North of Chermside or around Woodford, and the ash clouds quickly travelled down the valleys which existed at the time. The pattern of these valleys can be seen from the current distribution of the Brisbane Tuff (shown in blue). BRISBANE VOLCANOES 235 TO 215 MYA (Willmott, 2012 , p. 2) Brisbane Tuff can be seen at the Kangaroo Point cliffs. BRISBANE VOLCANOES 235 TO 215 MYA (Willmott, 2012 , p. 15) (Qld Govt, 2008) TUFF AS A BUILDING STONE https://assets.ehp.qld.gov.au/website/preview/image/lhis/85608?maxsize=1000&quality=8&format=jpeg&=.jpg https://assets.ehp.qld.gov.au/website/preview/image/lhis/85608?maxsize=1000&quality=8&format=jpeg&=.jpg (Raymond, 2016) • Blakey, R (n.d.) “Geological Time Periods”, image creator Ron Blakey, Colorado Plateau Geosystems, altered by Cally Bennet and FonsVanden Berg Melbourne Museum (2019) retrieved 20 October 2019 from: https://museumsvictoria.com.au/website/melbournemuseum/discoverycentre/600-million-years/timeline/index.html • Google Maps (2018) “Map data ©2018 Google” retrieved 17 September 2018 from: https://www.google.com/maps/@- 27.1428484,151.6199159,8.48z • Johnson, B. ,(n.d.) “Explore The Geologic Time Scale” retrieved 17 September 2018 from: https://www.sutori.com/story/geologic-time-scale--6jLYc56D5FvqWCbq3FHNwowh • Queensland Government Heritage Branch (2008) “Petrie Bight Retaining Wall” https://apps.des.qld.gov.au/heritageregister/ detail/?id=600159# • Raymond, Kerry (2016) “Illustrating the many natural colours of Brisbane tuff, St Mary's Anglican Church, Kangaroo Point”, retrieved 27 October 2019 https://commons.wikimedia.org/wiki/File:Illustrating_the_many_natural_colours_of_Brisbane_tuff,_St_Mary%27s_Angl ican_Church,_Kangaroo_Point,_2016.jpg • Willmott, Warwick (2012) “Rocks and Landscapes of Brisbane and Ipswich (Second Edition)” Geological Society of Australia, Queensland Division REFERENCES Find the Tasmantid Seamount Hotspot The map below shows the ages of seamounts in the Tasmantid and Lord Howe seamount chains Seamount Age in Millions of years Distance from the Moreton Brisbane seamount In cm on map In km (____cm x 200) Moreton Brisbane 22.5 0 cm Britannia 18.1 Hunter 17.5 Taupo 11.2 Gascoyne 7 0 5 10 15 20 25 0 500 1000 1500 2000 2500 Age (millions of years) Distance from First Seamount (km) Tasmantid Seamount Chain Task a) Measure the distance to each seamount from the Moreton Brisbane seamount and multiply each number by 200 to obtain the distance in km b) Plot the age versus distance in km on the graph above c) Extend the graph (extrapolate) to find the distance from the first seamount when the age is 0 millions of years d) Divide this number by 200 to obtain a distance in cm and use this data to estimate the current location of the Tasmantid hotspot. Plot this on the map e) Obtain the slope of the graph and then determine the inverse (or reciprocal) of his number to give you a speed in km/millions of years. Convert this value to mm / year to calculate the speed of the Indo-Australian plate. Questions 1. Explain why it is difficult to determine the location of the hotspot by direct measurement. ________________________________________________________________________________________ ________________________________________________________________________________________ 2. Explain the process used to obtain rock samples from these seamounts and to determine their age. ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ 3. There are many hotspots on the map which do not have a date. Infer why we have limited data on the age of these seamounts. ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ 4. Evaluate how close each data point was to the line of best fit and explain any variation? ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ 5. State your calculated value for the speed of the Indo-Australian plate and compare this to the accepted value of 70 mm/year. ________________________________________________________________________________________ ________________________________________________________________________________________ 6. Infer why has there not been any volcanoes produced by the Tasmantid hotspot in the last 7 million years? ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ 7. This process could be repeated to determine the current location of the Lord Howe seamount. Use the data on the map to evaluate how reliable such a calculation would be to the calculation you just performed for the Tasmantid seamount chain. ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ Find the Tasmantid Seamount Hotspot - ANSWERS The map below shows the ages of seamounts in the Tasmantid and Lord Howe seamount chains Seamount Age in Millions of years Distance from the Moreton Brisbane seamount In cm on map In km (____cm x 200) Moreton Brisbane 22.5 0 0 Britannia 18.1 1 200 Hunter 17.5 2.5 500 Taupo 11.2 4 800 Gascoyne 7 7 1400 y = -0.0109x + 21.561 0 5 10 15 20 25 0 500 1000 1500 2000 2500 Age in Millions of Years Distance from First Seamunt *km) Tasmantid Seamount Chain a) Measure the distance to each seamount from the Moreton Brisbane seamount and multiply each number by 200 to obtain the distance in km b) Plot the age versus distance in km on the graph above c) Extend the graph (extrapolate) to find the distance from the first seamount when the age is 0 millions of years. Distance = 2000 km or Distance = 2000 / 200 = 10 cm d) Divide this number by 200 to obtain a distance in cm and use this data to estimate the current location of the Tasmantid hotspot. Plot this on the map. Approximate locations shown as yellow circle e) Obtain the slope of the graph and then determine the inverse (or reciprocal) of his number to give you a speed in km/millions of years. Convert this value to mm / year to calculate the speed of the Indo-Australian plate. Slope = 0.0109 (my / km) Reciprocal = 1/0.0109 = 91.7 km / my = 91.7 𝑘𝑘𝑘𝑘 1 𝑚𝑚 𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 𝑦𝑦𝑦𝑦𝑦𝑦𝑦𝑦𝑦𝑦 × 1000 000 𝑚𝑚𝑚𝑚 1 𝑘𝑘𝑘𝑘 × 1 𝑚𝑚 𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 𝑦𝑦𝑦𝑦𝑦𝑦𝑦𝑦𝑦𝑦 1 000000 𝑦𝑦𝑦𝑦𝑦𝑦𝑦𝑦𝑦𝑦 = 91.7 𝑚𝑚𝑚𝑚/𝑦𝑦𝑦𝑦 Questions 1. Explain why it is difficult to determine the location of the hotspot by direct measurement. Hotspots are located below the mantle which is 5 – 10 km below the ocean bed and we do not yet have the technology to directly sample these depths. 2. Explain the process used to obtain rock samples from these seamounts and to determine their age. • Organise scientific expedition on research vessel such as RV Investigator including obtaining boat time, organising scientific staff etc. • Undertake seafloor mapping to identify best location to obtain fresh (unaltered) rocks • Dredge rocks from seafloor • Cut rocks and the sort, classify, describe, photograph and bag suitable rocks for radiocarbon dating back on shore 3. There are many hotspots on the map which do not have a date. Infer why we have limited data on the age of these seamounts. Owing to the extreme cost of setting up scientific expeditions to obtain dredge samples from the bottom of the ocean. 4. Evaluate how close each data point was to the line of best fit and explain any variation? The variation was of the order of 1-2 millions of years which may be due to small variations in the speed of the Indo-Australian tectonic plate. 5. State your calculated value for the speed of the Indo-Australian plate and compare this to the accepted value of 70 mm/year. The calculated value was 91.7 mm/year and this is quite close to the accepted value given the variations between the data points and the line of best fit described in the previous question. 6. Infer why has there not been any volcanoes produced by the Tasmantid hotspot in the last 7 million years? The hotspot may be below a thicker section of oceanic crust and so has not been able to break through or the hotspot may have cooled due to some process we do not yet understand. 7. This process could be repeated to determine the current location of the Lord Howe seamount hotspot. Use the data on the map to evaluate how reliable such a calculation would be to the calculation you just performed for the Tasmantid seamount chain. This calculation uses 5 data points, however there are only 2 available data points for the Lord Howe seamount so this method would be much less reliable than the one just performed. Oceanic Hotspots and RV Investigator Use the information contained in “3 Oceanic Hotspots and RV Investigator.ppt” to answer the following questions 1. Compare the processes which have led to the formation of island and submarine hotspot volcano chains. ___________________________________________________________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ 2. Explain how the Hawaiian Islands have formed. ___________________________________________________________________________________________ ___________________________________________________________________________________________ 3. Explain the processes which have led to the formation of the Tasmantid and Lord Howe Seamount Chains. ___________________________________________________________________________________________ ___________________________________________________________________________________________ 4. Describe the characteristics of the RV Investigator (refer to CSIRO 2019, Marine National Facility. Available at: https://mnf.csiro.au/ (Accessed 4 February 2020)) ___________________________________________________________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ 5. Explain the voyage goals and hypothesis of the 2018 RV Investigator Voyage. ___________________________________________________________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ 6. Explain the role of onboard mapping on the voyage and outline why mapping systems use sound waves instead of radio waves. ___________________________________________________________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ 7. What is the role of the sub-bottom profiler. ___________________________________________________________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ 8. Outline the process from when the rocks are deposited on the deck through to Argon dating. ___________________________________________________________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ 9. Explain the formation processes of the common oceanic rocks: Basalt, Conglomerate and Breccia. ___________________________________________________________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ Research Voyage Technology and Hotspot Volcanos Student Teacher Year Level / Subject Year 9 Science Assessment Instrument Unit Technology and Hotspot Volcano Research FINAL DUE Achievement Standards By the end of Year 9, students - Explain global features and events in terms of geological processes and timescales. - Describe social and technological factors that have influenced scientific developments and predict how future applications of science and technology may affect people’s lives. - Design questions that can be investigated using a range of inquiry skills. - Evaluate others’ methods and explanations from a scientific perspective - Use appropriate language and representations when communicating their findings and ideas to specific audiences. Australian Curriculum Content Descriptors and Elaborations ACSHE157- Scientific understanding, including models and theories, is contestable and is refined over time through a process of review by the scientific community ACSHE158 - Advances in scientific understanding often rely on developments in technology and technological advances are often linked to scientific discoveries ELBS1122 – Investigating technologies involved in the mapping of continental movement Cognitive Verbs Analyse, argue, communicate, discuss, explain, identify, investigate, justify, predict, select Conditions Mode Assignment – Research Investigation Length 700 - 1000 words Other Conditions • Adhere to the school Assessment Policy • Individual research Checkpoint (dates) Authentication Strategies Claim selected: Draft submitted: Final submitted: Dimensions Level of Achievement Science Understanding Science Inquiry Skills OVERALL Feedback _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ Context You have been studying plate tectonics, hot-spot volcanoes and have examined a case study of a 2018 RV Investigator voyage as an example of how modern technologies contribute to advances in scientific understanding. Task Investigate one of the following claims: • Scientific advances such as the identification of a new seamount chain could not occur without a range of modern technologies. • Scientific research voyages which utilise modern technology can lead to gradual changes in our current models of hot spot volcanoes. • Earthquakes and Volcanoes do not pose a risk for Australia as we sit in the middle of a large tectonic plate, so we should not waste money on scientific research voyage technology in geoscience. • Australia should focus all its geoscience research and technology into locating the mantle hot spot currently below Bass Strait as this could erupt at any time. You may identify an alternative claim, related to how technology is used to research hot spot volcanoes, in consultation with your teacher. To complete this task, you need to: • select a claim to be evaluated • identify and explain the relevant scientific concepts associated with the claim – explanations should use appropriate technical language and include images, maps, diagrams and graphs • investigate your topic and select scientific evidence to support (or refute) the claim • explain how scientists use current technologies to investigate the topic you are considering • analyse the data (include statistics, graphs, charts etc.) • develop a scientific argument to support or refute the claim (including justified conclusions) • discuss the quality of the evidence • communicate findings in an appropriate scientific genre, including a correctly formatted Reference list. Claim: _________________________________________________________ Claim Introduction: - Introduce claim. Evidence & Reasoning Paragraph 1: Explanation of topic - Identify the relevant scientific concepts associated with the claim - Structure of the Earth and plate tectonics - The creation of chains of hotspot volcanoes Paragraph 2: - Explain what technologies are used to investigate this topic - e.g. research voyages, mapping and surveying systems, radiometric dating etc. Paragraph 3: - Explain how these technologies are related to the claim you are investigating. - Evaluate the quality of the data produced by these technologies - Outline the process by which the scientific community reviews this data and agrees on new models or theories Paragraph 4: - Conclusion and re-state claim and whether it has been proven or refuted. Reference list: - Alphabetical order and APA Weekly checkpoints Week : Week : Week : SU SIS YEAR 9 SCIENCE A B C D E Science Understanding Earth and space sciences justified explanation of global features and events in terms of geological processes and timescales informed explanation of global features and events in terms of geological processes and timescales explanation of global features and events in terms of geological processes and timescales description of global features and events with reference to geological processes and timescales statements about global features and events justified explanation of how science and technology may affect peoples’ lives informed explanation of how science and technology may affect peoples’ lives explanation of how science and technology may affect people’s lives statements about applications of science and technology statements about science and technology Science inquiry skills Processing and analysing data and i f ti analysis of trends in data to identify and explain relationships and draw justified conclusions analysis of trends in data to identify and describe relationships to draw conclusions consistent with evidence analysis of trends in data to identify relationships statements about trends and inconsistencies in data statements about data Evaluating application of scientific knowledge and investigation findings to critically evaluate claims made by others application of scientific knowledge and investigation findings to make informed evaluations of claims made by others application of scientific knowledge and investigation findings to evaluate claims made by others description of claims made by others statements about claims Communicating concise and coherent use of appropriate language and accurate representations when communicating findings and ideas to specific audiences coherent use of appropriate language and accurate representations when communicating findings and ideas to specific audiences use of appropriate language and representations when communicating findings and ideas to specific audiences use of everyday language and representations when communicating findings and ideas to audiences fragmented use of language and representations when communicating findings and ideas to audiences Comments:________________________________________________________________________________________________________________________________