Blog icon

By Amy Edwards 14 August 2017 5 min read

Two months after Portugal’s deadliest fire season in recent record, thousands of firefighters have again been deployed in the last few days to battle new wildfires.

It’s a crisis Australia knows well from its own bushfire history which paints an equally bleak and devastating picture.

Events such as Ash Wednesday in Victoria and South Australia in the 1980s, Black Saturday in Victoria in 2009 and the enduring 2001 Black Christmas in NSW, resulted in hundreds of lives lost and close to 5,000 homes destroyed.

These are just three examples of a long list of major Australian bushfire events.

As we head towards 2050, climate change is predicted to cause fire seasons to start earlier, end later and involve more frequent extremes of weather that support major loss events.

More than ever before, planning and preparation is playing a significant role in mitigating major bushfires and their effects on lives, properties and infrastructure.

Following a state-wide project that saw CSIRO develop mapping technology that identified bushfire prone areas in Queensland down to a 25 metre square area, our researchers have now stepped onto the international stage by mapping regions all over the world that have conditions susceptible to fire events.

This latest global tool is a valuable resource for hazard analysts, financers, developers and even the general public, seeking bushfire information online.

Thinking global when it comes to natural disasters

Our bushfire urban design researchers have developed the bushfire hazard module for the World Bank’s ThinkHazard! website, which identifies areas that may be subject to natural disasters in a proposed development project area and makes recommendations on ways to reduce their impact.

The global site enables users to search a country, state or region and identify if a particular hazard, such as tsunami, flood, volcano or earthquake, has the potential to cause loss, damage or disruption to a development project in the area.

“This is a solid recognition of our global presence and cements that the lessons learnt in Australia can help others internationally when it comes to the understanding and mitigating bushfire impacts,” bushfire urban design research leader Justin Leonard says.

“There’s lots of information that is now available online about floods, fire and other hazards but it’s not always easily accessible and not generally in the same place,” fellow CSIRO scientist Glenn Newnham adds.

Besides giving location specific advice, ThinkHazard! provides links to additional resources such as local risk assessment approaches and highlights how each hazard may change in the future as a result of climate change.

It took the CSIRO team about six months to collate and build the bushfire information system, which was largely based on the probability of experiencing weather conditions that could support a fire ignition and spread.

However the search results are not always what people might expect.

Some regions identified as high fire danger areas in ThinkHazard! typically have little to no vegetation to actually burn.

“While the really obvious arid zones such as the Sahara and Simpson Desert have been removed from the ThinkHazard! wildfire mapping, there are many areas adjacent to deserts that are arid most of the time,” Leonard says.

“When these arid regions experience unusually high rainfall it can lead to extensive grasslands which can later dry out and provide a wildfire risk. This includes Central Australia near the Simpson Desert, and sub-Saharan Africa, which both have high fire danger readings. “

“The ThinkHazard! wildfire mapping methodology has limitations due to its reliance on broad scale global weather datasets. However our approaches to mapping wildfire hazard within Australia can been more sophisticated and data intensive.”

Applying knowledge in Australia

In February 2014, the same team developed a series of state-wide mapping products for Queensland, identifying the most bushfire prone areas. The project aimed to support the bushfire hazard provisions of Queensland’s State Planning Policy (SPP), which came into effect on 2 December 2013.

Bushfire Prone Areas, Grassfire Prone Areas and Low Hazard Areas for Queensland.

This methodology determines bushfire hazards based on the potential intensity of a severe bushfire, which involves assessment of fire weather severity, fuel availability and topography. This is a useful indicator of areas where building loss could be expected and helps planners to design and locate buildings based on the likely level of fire severity in a particular location.

“The mapping products allow Queensland local governments to more accurately identify areas at risk from bushfires and to have greater confidence in the design of mitigation strategies that are proportional to the potential level of threat,” Leonard says.

The Bushfire Prone Area mapping has now been widely adopted by local governments. It is also being used to prioritise areas for community engagement, landscape risk treatment and insurance risk profiling.

Using knowledge and online tools to embrace shared responsibility

Online tools like the SPP mapping for Queensland and ThinkHazard!, those that incorporate advanced mapping knowledge and technology, are emerging as essential resources for people requiring accurate and detailed information to understand, plan and prepare for the possibility of fire.

Online mapping tools and warning systems are also becoming prevalent as a way to issue targeted warnings before and during fire events.

“Everything we work on has a mapping aspect to it,” Newnham says.

“Computers are faster, online mapping tools are easier and more sophisticated and the data is more accurate and more easily accessible, which means the systems are improving rapidly and will continue to do so.”

ThinkHazard! Identifies regions that have very low to high fire danger ratings.

The tools are not only essential for fire authorities but also for the general public.

“We are enabling people to get more of this information and helping them build this information into their own personal bushfire planning,” Leonard says.

“We embrace the concept of shared responsibility across government agencies, local communities, right down to the mum and dad house owner, and that’s really important.”

Leonard believes if predictions of climate change impacting on the intensity and length of bushfire seasons are correct, people must adopt a combination of better building practices and landscape design that match the fire-prone land they live in.

“Perhaps one day instead of feeling powerless to stop bushfires, we will be able to better understand the natural place fire has in our Australian landscape and feel safe in the knowledge that we are well prepared for it,” he says.

Contact us

Find out how we can help you and your business. Get in touch using the form below and our experts will get in contact soon!

CSIRO will handle your personal information in accordance with the Privacy Act 1988 (Cth) and our Privacy Policy.

First name must be filled in

Surname must be filled in

I am representing *

Please choose an option

Please provide a subject for the enquriy

0 / 100

We'll need to know what you want to contact us about so we can give you an answer

0 / 1900

You shouldn't be able to see this field. Please try again and leave the field blank.